Main / Sales catalogue / Field crop-spraying machines “Victoria” / Lift-up low capacity field sprayer ОН 600 “Victoria”

Lift-up low capacity field sprayer ОН 600 “Victoria”

Description Maintenance
handbook
Application
instruction
Equipment
alignmen
Spare parts Delivery

Technical and maintenance information:

Characteristics

14 m

16 m

18 m

Boom hydraulic lifting and lowering.

Non adjustable

0.5- 1.9

0.5- 1.9

The volume of the chemicals barrel

600 l

The hand washing reservoir

10 l

The chemical apparatus set power-supply voltage

12 V

Kind of current

Direct current

Power consumption of the complete set

350 W

Operating hydraulic pressure in the system

0.8-1 atmosphere

Overall operating width of the spraying guns

14 m

16 m

18 m

Electric pump -13,8 V.

No less than 55 l/min

Norm for consumption l/ha

15 – 200

Dry weight of the sprayer, kg, no more than

260

320

380

Overall dimensions:

 

 

 

For transport:

 

 

 

length

1.2

1.5

1.5

width

2.65

3.15

3.45

height

1.65

2.34

2.34

In position:

 

 

 

length

1.65

1.5

1.5

width

12.5

14.5

16.5

height

1.65

2.34

2.34

  • The chemicals barrel has a scale for visual inspection of the filling and spray material flow rate.
  • The booms are manufactured with the modern steel blanking technology. This construction exceeds the booms of the steel pipes in strength and reliability by several times. The metal is covered with the special chemical resistance anti-corrosive paints.

The booms have the spring-hydraulic loaded hanger rod with the effective damping of the bouncing and lateral oscillations.
Automatic locks on the unfolding units of the boom;
Hydraulic dampers for damping the bouncing oscillations:
Side dampers for damping the lateral oscillations in the longitudinal plane. It increases the boom reliability especially when operating at high speed – 12 km/h. and large scales of the booms – 18 m;
The boom is equipped with the central spring- damping elements to perfectly follow the surface relief;
The boom overhand is equipped with the system of the driving springs that allow folding the boom in case of meshing with the obstacle. The boom remains intact.

  • The frame of the sprayer is a welded assembly of the fashioned plate metal. That allowed to save the weight a and improve its strength.
  • The barrel underside has an intake fitting with the shutoff cock for the cutoff of the liquid flowing to the suction hose of the pump.
  • The barrel underside has the fitting for connecting the flexible tube of the hydraulic mixer line from the distributing valve.
  • Electrical pump with 70 l/min capacity. It has the extended life of the motor. The pumping unit is made of the chemical-resistant plastics (non-hydroscopic). The ceramic mechanical seal is installed instead of the gasket, and that allowed extending the pump life to 8,000 hours.
  • The electric motor of the sprayer: The turning number – 4,000 r/min, the strengthened root bearing and the enhanced brush carrier (the life was increased to 4,000 hours based on that).
  • The rate for consumption the spray material  from 15 l/ha to 200 l/ha.
  • The control panel is installed in a tractor cab, in a convenient place for the operator (driver). It allows to control the work of the sprayer stay in the tractor cab. You can switch on/off the left side of the boom distinctly. All the power plugs are plastic and hermetically-sealed.
  • Easy to operate and fail-safe.

Transportation
The lift-up sprayers of all modification can be transported in the light vehicle trailer.

The less expenditure – the higher income

 The low-capacity sprayer work features.

  • Under the conditions of the petroleum, oil, and lubricants constantly rise in price, the market appearance of the new, more effective but more expensive pesticides and the need for carrying out the protective measures on a tight schedule, one of the real ways of cost cutting is to reduce the consumption rate of the spray material. This corresponds to the current trends of the pesticides application, and to increasingly stringent environmental requirements. The biological and economic effectiveness of spraying the pesticides on the agriculturally used areas depends on the coverage density of the treated area with the drops of the spray material (with an equal dose of the agent) with the consumption rate of the spray material.
  • The founder of the capacity sprayer is Zorin A.V. In 1999, the study subject was the first certified low-capacity sprayerZarya 240СХ” with the disk pulverizer. The laboratory and field tests established the high operating quality of the test machine according to the main estimation indicators
  • The spray material cover density;
  • Effective operation width;
  • Median and mass diameter of the drops trace.
  • The implemented method of splitting the spray material by means of the revolving disc of the pulverizer allows to reduce the agent consumption rate in 2 times, and the spray material to 30 l/ha in comparison with the traditional sprayers (300-400 l/ha) with the equal biological effectiveness of the pesticides.
  • At the same time, the experience has proven that the decrease of the liquid flow rate from 200 to 10 l/ha increases the productivity of the OP-2000 sprayer in 2 times, and the treating expenses (without including the cost of the agent) are reduced in 4 times.
  • The implication of the low-capacity spraying used in our Victoria sprayers consists in the efficient and rational use of the spray material. In this case, it is important to mould the solutions, suspensions or emulsions into the drops of the optimal size and spread them to the treated surface with the sufficient density and uniformity spending the lowest volume of the fluid and the minimum acceptable amount of the agent. The outstanding feature of “Victoria” low-capacity sprayers operation in comparison with the traditional sprayers is the higher level of the spray dispersion and higher performance quality, particularly, better penetration of spray material into the heads of the plants, better uniformity and covering density, no liquid draining from the plant surface into the soil
  • The pesticides precipitation of the generated after the liquid evaporation holds on the plant longer. It is also less subjected to wind, dew, rain, sun rays, meanwhile keeping the toxicity for the pests. At high technical efficiency, all these factors allow to significantly reduce the liquid and agents rate of consumption and to reduce the level of the soil pollution.

The economic efficiency comparison table of “Victoria” sprayer equipped with the electric spraying guns and the sprayer with the standard equipment.

 Type of the equipment

газ66-1

“Victoria” sprayer. Electrical rotatory spraying guns

газ66-2

OP-2000 High pressure air-jets

Spray material rate for consumption, l/ha

30 l/ha

200 l/ha

Hectares treated with one filling-in, ha.

60

10

Number of water filling-ins for treating 100 ha.

2

10

The amount of the consumed water for treating 100 ha.

3 t

20 t

Actual time required for treating 100 ha, hours.

5

9.3

Outage time of waiting for water, hours.

no

2.5

The amount of races of the additional tractor for water trucking.

1.5

10

  • Being the manufacturer, our company enters into commitment of the guarantee maintenance within a year and the post-guarantee maintenance for the entire operating life.
 

Due to the permanent work for the MO sprayers and equipment improvements, their design can be changed without impairing the characteristics of the products. If it is necessary, the information about this issue will be attached with the separate sheets to the “Guidelines” or displayed in the “Special features”.

Attention!